R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

35
Description
Use the oap management-ip command to configure the management IP address of an OAP module on
the network device.
Use the undo oap management-ip command to restore the default.
By default, the management IP address of an OAP module is not configured.
When you use network management station (NMS) to manage an OAP module, you must first configure
the management IP address of the OAP module.
Examples
# Configure the management IP address of the OAP module in slot 3 as 1.1.1.1.
<Sysname> System-view
[Sysname] oap management-ip 1.1.1.1 slot 3
oap reboot
Syntax
oap reboot slot slot-number
View
User view
Default level
2: System level
Parameters
slot slot-number: Specifies the number of the slot where an OAP system resides.
Description
Use the oap reboot slot command to reset the system on an OAP module.
Examples
# Reset the system on the OAP module in slot 3.
<Sysname> oap reboot slot 3
This command will recover the OAP from shutdown or other failed state.
Warning: This command may lose the data on the hard disk if the OAP is not being shut down!
Continue? [Y/N]:y
Reboot OAP by command.
ACSEI server configuration commands
acsei client close
Syntax
acsei client close client-id
View
ACSEI server view