R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

42
ACSEI client configuration commands
acsei-client enable
Syntax
acsei-client enable
undo acsei-client enable
View
Interface view
Default level
2: System level
Parameters
None
Description
Use the acsei-client enable command to enable ACSEI client.
Use the undo acsei-client enable command to disable ACSEI client.
By default, ACSEI client is disabled.
A system can run only one ACSEI client, that is, ACSEI client can be enabled on only one interface at a
time. However, ACSEI client on the Comware platform and that on the OAP module can run
simultaneously.
Examples
# Enable ACSEI client on interface GigabitEthernet 0/1
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] acsei-client enable
display acsei-client information
Syntax
display acsei-client information
View
Any view
Default level
1: Monitor level
Parameters
None
Description
Use the display acsei-client information command to display information about ACSEI client.