R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

48
View
System view
Default level
3: Manage level
Parameters
zone-name: Time zone name, a case-sensitive string of 1 to 32 characters.
add: Adds a specified offset to UTC time.
minus: Subtracts a specified offset to UTC time.
zone-offset: Offset to the UTC time, in the hh:mm:ss format. Zeros can be omitted, unless you specify
00:00:00.
Description
Use the clock timezone command to set the local time zone.
Use the undo clock timezone command to restore the local time zone to the default UTC time zone.
By default, the local time zone is UTC zone.
NOTE:
To view the result after the configuration takes effect, use the display clock command. The time displayed
in the log or debug information is the specified local time zone.
Related commands: clock datetime, clock summer-time one-off, clock summer-time repeating, and
display clock.
Examples
# Set the name of the local time zone to Z5, five hours ahead of UTC time.
<Sysname> system-view
[Sysname] clock timezone z5 add 5
configure-user count
Syntax
configure-user count number
undo configure-user count
View
System view
Default level
2: System level
Parameters
number: Number of users, in the range from 1 to 56.
Description
Use the configure-user count command to configure the number of users allowed to enter system view at
the same time.