R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

Use the undo configure-user count command to restore the default.

Two users are allowed to configure in system view by default.

Related commands: display configure-user.

NOTE:

• When multiple users enter system view to confi

ure certain attribute, only the last confi

uration applies.

• When the number of users has already reached the limit, other users can not enter system view.

Examples

# Configure the limit of users as 4.

<Sysname> system-view

[Sysname] configure-user count 4

Syntax

undo copyright-info enable

View

System view

Default level

3: Manage level

Parameters

None

Description

Use the copyright-info enable command to enable the display of copyright information.

Use the undo copyright-info enable command to disable the display of copyright information.

By default, the display of copyright information is enabled.

Examples

# Enable the display of copyright information.

<Sysname> system-view

[Sysname] copyright-info enable

• If a user logs in to the firewall through Telnet, the following information is displayed:

***************************************************************************

* Without the owner's prior written consent, *

* no decompiling or reverse-engineering shall be allowed. *

****************************************************************************

• If a user has already logged in through the console port, and then quits user view, the following

information is displayed: