R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

53
Field Descri
p
tion
CPU usage info (no: idx:)
Information of CPU usage records (no: The (no+1)th record is currently
displayed. no numbers from 0, a smaller number equals a newer record. idx:
index of the current record in the history record table). If only the information of
the current record is displayed, no and idx are not displayed.
CPU Usage Stat. Cycle
CPU usage measurement interval, in seconds. For example, if the value is 41,
it indicates that the average CPU usage during the last 41 seconds is
calculated. The value range of this field is 1 to 60.
CPU Usage Average CPU usage in a measurement interval, in percentage
CPU Usage Stat. Time
CPU usage statistics time in seconds, that is, the system time when the
command is executed
CPU Usage Stat. Tick
System runtime in ticks, represented by a 64-bit hexadecimal. CPU Tick High
represents the most significant 32 bits and the CPU Tick Low the least
significant 32 bits.
Actual Stat. Cycle
Actual CPU usage measurement interval in ticks, represented by a 64-bit
hexadecimal. CPU Tick High represents the most significant 32 bits and the
CPU Tick Low the least significant 32 bits. Owing to the precision of less than
one second, the actual measurement periods of different CPU usage records
might differ slightly.
display cpu-usage history
Syntax
display cpu-usage history [ task task-id ]
View
Any view
Default level
1: M o n i t o r l e ve l
Parameters
task task-id: Displays the history CPU utilization rates of the specified task, where task-id represents the
task number. If the task-id argument is not provided, the system displays the history CPU utilization rates
of the entire system (the CPU utilization rates of the entire system is the sum of CPU utilization rates of all
tasks).
Description
Use the display cpu-usage history command to display the history CPU utilization rates in a coordinate
plane.
If no argument is provided, the system displays the history CPU utilization rates of the whole system.
The system collects the statistics of history CPU utilization rates at a certain interval and saves the statistics
in the history record area. You can use the display cpu-usage history command to display the history
CPU utilization rates in the last 60 minutes. The history CPU utilization rates are displayed through x and
y coordinates.
• Any CPU utilization statistics value takes the closest y-coordinate value. For example, a statistics
value of 53% is displayed as 55%, and a statistics value of 52% is displayed as 50%.