R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

62
display rps
Syntax
display rps [ rps-id ]
View
Any view
Default level
1: Monitor level
Parameters
rps-id: Displays the status of the specified RPS, where rps-id represents the RPS number.
Description
Use the display rps command to display status of the RPS.
Examples
# Display RPS status of the firewall.
<Sysname> display rps
RPS 2 State: Normal
The output shows that RPS 2 works normally.
display schedule reboot
Syntax
display schedule reboot
View
Any view
Default level
3: Manage level
Parameters
None
Description
Use the display schedule reboot command to display the reboot time set by the user.
Related commands: schedule reboot at and schedule reboot delay.
Examples
# Display the reboot time of the firewall.
<Sysname> display schedule reboot
System will reboot at 16:00:00 03/10/2010 (in 2 hours and 5 minutes).
The output shows that the system will reboot at 16:00:00 on March 10, 2010 (in two hours and five
minutes).