R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

2
* Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
User interface con0 is available.
Please press ENTER.
• At this moment, pressing Enter does not start a session. To start the terminal session, enter s instead.
<Sysname>
%Mar 2 18:40:27:981 2005 Sysname SHELL/5/LOGIN: Console login from con0
auto-execute command
Syntax
auto-execute command command
undo auto-execute command
View
User interface view
Default level
3: Manage level
Parameters
command: Specifies a command to be automatically executed.
Description
Use the auto-execute command command to specify a command to be automatically executed when a
user logs in to the current user interface.
Use the undo auto-execute command command to remove the configuration.
By default, command auto-execution is disabled.
The command is not supported by the console port.
The system automatically executes the specified command when a user logs in to the user interface, and
tears down the user connection after the command is executed. If the command triggers another task, the
system does not tear down the user connection until the task is completed.
Typically, you use can use the auto-execute command telnet command in user interface view to enable
a user to automatically telnet to the specified host when the user logs in to the device. After the user
terminates the connection with the host, the user’s connection with the device is automatically terminated.