R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

69
CAUTION:
• Device reboot might result in the interruption of the ongoing services. Use these commands with caution.
• If a main boot file fails or does not exist, the firewall cannot be rebooted with the reboot command. In
this case, you can re-specify a main boot file to reboot the firewall, or you can power off the firewall,
then power it on and the system automatically uses the backup boot file to restart the firewall.
• If you are performing file operations when the firewall reboots by this command, the system does not
execute the command.
Examples
# Reboot the firewall.
<Sysname> reboot
reset unused porttag
Syntax
reset unused porttag
View
User view
Default level
1: Monitor level
Parameters
None
Description
Use the reset unused porttag command to clear the 16-bit index saved but not used in the current system.
A confirmation is required when you carry out this command. If you fail to make a confirmation within 30
seconds or enter “N” to cancel the operation, the command will not be carried out.
Examples
# Clear the 16-bit index saved but not used in the current system.
<Sysname> reset unused porttag
Current operation will delete all unused port tag(s). Continue? [Y/N]:y
<Sysname>
schedule reboot at
Syntax
schedule reboot at hh:mm [ date ]
undo schedule reboot
View
User view
Default level
3: Manage level