R3166-R3206-HP High-End Firewalls Getting Started Command Reference-6PW101

73
Description
Use the system-failure command to configure the exception handling method.
By default, the system adopts the reboot method to handle exceptions.
Examples
# Set the exception handling method to reboot.
<Sysname> system-view
[Sysname] system-failure reboot
temperature-limit
Syntax
temperature-limit slot-number lower-value upper-value
undo temperature-limit slot-number
View
System view
Default level
2: System level
Parameters
lower-value: Lower temperature limit in Celsius degrees.
upper-value: Upper temperature limit in Celsius degrees.
The upper-value argument must be larger than the lower-value argument.
Description
Use the temperature-limit command to set the temperature alarm threshold on a card.
Use the undo temperature-limit command to restore the temperature alarm threshold to the default.
Examples
# Set the low temperature threshold on card 1 to 10°C (50°F) and the upper temperature limit to 75°C
(167° F) .
<Sysname> system-view
[Sysname] temperature-limit 1 10 75
Setting temperature limit succeeded.
time at
Syntax
time time-id { one-off | repeating } at time [ month-date month-day | week-day week-daylist ] command
command
time time-id at time date command command
undo time time-id
View
Job view