R3166-R3206-HP High-End Firewalls Getting Started Guide-6PW101

113
Figure 69 Add a local user
Table 10 Local user configuration items
Item Descri
p
tion
User Name
Enter a username. A username is case sensitive, and cannot contain any of these
characters: “/”, “\”, “:”, “|”, “*”, “?”, “<”, “>”, “@” and “"”.
IMPORTANT:
A username may contain spaces. However, leading spaces and trailing spaces are
always ignored. An all-space input is considered null.
User Privilege Level Set the user privilege level of the user.
Service Type
Set the service type that the user can use, including FTP, SSH, Telnet, Terminal
and PPP.
IMPORTANT:
For a user to log in to the Firewall through the web interface, you must select the
service type Telnet for the user.
Password Set the password
Confirm Password Reset the password, which must be the same with the previously set password.
Local user configuration example
Network requirements
As shown in Figure 70, configure a local user account on the firewall so that the firewall can perform
local authentication for the Telnet user.
Figure 70 Configure a local user account for a Telnet user
Configuration procedure
# Configure a local user.
Firewall