R3166-R3206-HP High-End Firewalls Getting Started Guide-6PW101

17
Figure 15 Configuration page
Configuring scheme authentication for console login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see “Configuration requirements.”
Configuration procedure
Follow these steps to configure scheme authentication for console login:
To do… Use the command…
Remarks
Enter system view system-view —
Enter console user
interface view
user-interface console
first-number [ last-number ]
—
Specify the scheme
authentication mode
authentication-mode
scheme
Required
Whether local, RADIUS, or HWTACACS
authentication is adopted depends on the
configured AAA scheme.
By default, users that log in through the console port
are not authenticated.