R3166-R3206-HP High-End Firewalls Getting Started Guide-6PW101

26
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see “Configuration requirements.”
Configuration procedure
Follow these steps to configure scheme authentication for Telnet login
To do… Use the command…
Remarks
Enter system view system-view —
Enable Telnet telnet server enable
Required
Disabled by default
Enter one or multiple VTY user
interface views
user-interface vty first-number
[ last-number ]
—
Specify the scheme authentication
mode
authentication-mode scheme
Required
Whether local, RADIUS, or
HWTACACS authentication is
adopted depends on the configured
AAA scheme.
By default, local authentication is
adopted.
Enable command authorization command authorization
Optional
By default, command authorization is
not enabled.
• Create a HWTACACS scheme,
and specify the IP address of the
authorization server and other
authorization parameters.
• Reference the created
HWTACACS scheme in the ISP
domain.