R3166-R3206-HP High-End Firewalls Getting Started Guide-6PW101

29
To do… Use the command… Remarks
Specify an IP address for the
management Ethernet interface
ip address ip-address { mask |
mask-length }
Required
By default, the IP address of the
management Ethernet interface is
192.168.0.1/24.
Return to system view quit —
Enable display of copyright
information
copyright-info enable
Optional
Enabled by default.
Enter one or multiple VTY user
interface views
user-interface vty first-number
[ last-number ]
—
User
interface
configuration
Enable the terminal
service
shell
Optional
Enabled by default.
Enable the current
user interface(s) to
support either Telnet,
SSH, or both of them
protocol inbound { all | ssh |
telnet }
Optional
By default, both protocols are
supported.
The configuration takes effect next
time you log in.
Define a shortcut key
for terminating tasks
escape-key { default |
character }
Optional
By default, you can press Ctrl+C to
terminate a task.
Configure the type of
terminal display
terminal type { ansi | vt100 }
Optional
By default, the terminal display
type is ANSI.
Set the maximum
number of lines on the
next screen
screen-length screen-length
Optional
By default, the next screen displays
24 lines.
A value of 0 disables the function.
Set the size of history
command buffer
history-command max-size
value
Optional
By default, the buffer saves 10
history commands.
Set the idle-timeout
timer
idle-timeout minutes [ seconds ]
Optional
The default idle-timeout is 10
minutes for all user interfaces.
The system automatically
terminates the user’s connection if
there is no information interaction
between the device and the user in
timeout time.
Setting idle-timeout to 0 disables
the timer.