R3166-R3206-HP High-End Firewalls Getting Started Guide-6PW101

37
To do… Use the command… Remarks
Enter one or more AUX user
interface view
user-interface aux first-number
[ last-number ]
—
Specify the none authentication
mode
authentication-mode none
Required
By default, password
authentication is performed for
users that log in through the AUX
port.
Configure common settings for
AUX login
—
Optional
See "Configuring common settings
for AUX login (
optional)."
After the configuration, next time you log in to the device through the AUX port, you are prompted to
press enter. A prompt such as <HP> appears after you press Enter, as shown in Figure 25.
Figure 25 Configuration page
Configuring password authentication for AUX login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see “Configuration requirements.”
Configuration procedure
Follow these steps to configure password authentication for AUX login:
To do… Use the command…
Remarks
Enter system view system-view —
Enter one or more AUX user
interface views
user-interface aux first-number
[ last-number ]
—