R3166-R3206-HP High-End Firewalls Getting Started Guide-6PW101

38
To do… Use the command… Remarks
Specify the password
authentication mode
authentication-mode password
Required
By default, you can log in to the
device through the AUX port with
password authentication and have
user privilege level 0 after login.
Set the local password
set authentication password
{ cipher | simple } password
Required
By default, no local password is
set.
Configure common settings for
AUX login
—
Optional
See “Configuring common settings
for AUX login (optional).”
After the configuration, next time you log in to the device through the AUX port, you are prompted to
enter a login password. A prompt such as <HP> appears after you input the password and press Enter,
as shown in Figure 26.
Figure 26 Configuration page
Configuring scheme authentication for AUX login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the AUX port with password authentication and have user
privilege level 0 after login. For information about logging in to the device with the default configuration,
see “Configuration requirements.”
Configuration procedure
Follow these steps to configure scheme authentication for AUX login:
To do… Use the command…
Remarks
Enter system view system-view —