R3166-R3206-HP High-End Firewalls Getting Started Guide-6PW101

51
Configuring none authentication for modem login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see “Configuration requirements.”
When you log in to the device through modems, specify operating mode of the AUX interface is protocol.
Configuration procedure
Follow these steps to configure none authentication for modem login:
To do… Use the command…
Remarks
Enter system view system-view —
Enter AUX interface view interface aux interface-number
—
Specify operating mode for the
AUX interface
async mode { flow | protocol }
Required
By default, the mode is flow.
Exit to system view quit
—
Enter one or more AUX user
interface views
user-interface aux first-number
[ last-number ]
—
Specify the none authentication
mode
authentication-mode none
Required
By default, the modem login
authentication mode is password.
Configure common settings for VTY
user interfaces
—
Optional
See “Configuring common settings
for VTY user interfaces (optional).”
After the configuration, when you log in to the device through modems, you are prompted to press Enter.
A prompt such as <HP> appears after you press Enter, as shown in Figure 38.