R3166-R3206-HP High-End Firewalls Getting Started Guide-6PW101

53
To do… Use the command… Remarks
Configure common settings for
VTY user interfaces
—
Optional
For more information, see
“Configuring common settings for
VTY user interfaces (optional).”
After the configuration, when you log in to the device through modems, you are prompted to enter a
login password. A prompt such as <HP> appears after you input the password and press Enter, as shown
in Figure 39.
Figure 39 Configuration page
Configuring scheme authentication for modem login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see “Configuration requirements.”
When you log in to the device through modems, specify operating mode of the AUX interface is protocol.
Configuration procedure
Follow these steps to configure scheme authentication for modem login:
To do… Use the command…
Remarks
Enter system view system-view —
Enter AUX interface view
interface aux
interface-number
—
Specify operating mode for
the AUX interface
async mode { flow |
protocol }
Required
By default, the mode is flow.