R3166-R3206-HP High-End Firewalls Getting Started Guide-6PW101

54
To do… Use the command… Remarks
Exit to system view quit
—
Enter AUX user interface
view
user-interface aux
first-number [ last-number ]
—
Specify the scheme
authentication mode
authentication-mode scheme
Required
Whether local, RADIUS, or HWTACACS
authentication is adopted depends on the
configured AAA scheme.
By default, the modem login authentication
mode is password.
Enable command
authorization
command authorization
Optional
• By default, command authorization is not
enabled.
• By default, command level for a login user
depends on the user privilege level. The user
is authorized the command with the default
level not higher than the user privilege level.
With the command authorization
configured, the command level for a login
user is determined by both the user privilege
level and AAA authorization. If a user
executes a command of the corresponding
command level, the authorization server
checks whether the command is authorized.
If yes, the command can be executed.
Enable command
accounting
command accounting
Optional
• By default, command accounting is
disabled. The accounting server does not
record the commands executed by users.
• Command accounting allows the
HWTACACS server to record all executed
commands that are supported by the device,
regardless of the command execution result.
This helps control and monitor user
operations on the device. If command
accounting is enabled and command
authorization is not enabled, every executed
command is recorded on the HWTACACS
server. If both command accounting and
command authorization are enabled, only
the authorized and executed commands are
recorded on the HWTACACS server.
Exit to system view quit —