R3166-R3206-HP High-End Firewalls Getting Started Guide-6PW101

65
To do… Use the command… Remarks
Create a local user and enter
local user view
local-user user-name
Required
By default, no local user is
configured.
Configure a password for the
local user
password { cipher | simple }
password
Required
By default, no password is
configured for the local user.
Specify the command level of
the local user
authorization-attribute level level
Required
By default, no command level is
configured for the local user.
Specify the Telnet service type
for the local user
service-type web
Required
By default, no service type is
configured for the local user.
Exit to system view quit —
Enter management Ethernet
interface view
interface interface-type
interfac-number
Required
Assign an IP address and subnet
mask to the management
Ethernet interface
ip address ip-address { mask |
mask-length }
Required
By default, the IP address of the
management Ethernet interface is
192.168.0.1/24.
Displaying and maintaining web login
To do… Use the command… Remarks
Display information about web
users
display web users Available in any view
Display HTTP state information display ip http Available in any view
Display HTTPS state information display ip https Available in any view
Web login example
HTTP login example
Network requirements
As shown in Figure 42, the PC is connected to the firewall over an IP network. The IP address of firewall
i s 10 .15 3 .17. 82 / 2 4 .