R3166-R3206-HP High-End Firewalls Getting Started Guide-6PW101

Figure 42 Network diagram for configuring HTTP login

Configuration procedure

1. Configuration on the device

# Log in to the device via the console port and configure the IP address and mask of the management

Ethernet interface GigabitEthernet 0/1 of the device.

<Firewall> system-view

[Firewall] interface GigabitEthernet0/1

[Firewall-GigabitEthernet0/1] ip address 10.153.17.82 255.255.255.0

[Firewall-GigabitEthernet0/1] quit

# Create a local user named admin, and set the password to admin for the user. Specify the Telnet

service type for the local user, and set the command level to 3 for this user.

[Firewall] local-user admin

[Firewall-luser-admin] service-type web

[Firewall-luser-admin] authorization-attribute level 3

[Firewall-luser-admin] password simple admin

2. Configuration on the PC

# On the PC, run the web browser. Enter the IP address of the device in the address bar, 192.168.0.58

in this example. The web login page appears, as shown in Figure 43.

Figure 43 Web login page