R3166-R3206-HP High-End Firewalls Getting Started Guide-6PW101

74
Configuring NMS login
Connect the Ethernet port of the PC to the management Ethernet interface of the firewall module over an
IP network, as shown in Figure 48. Mak
e sure the PC and the firewall module can reach each other.
Figure 48 Network diagram for configuring NMS login
Follow these steps to configure SNMPv3 settings:
To do… Use the command…
Remarks
Enter system view system-view —
Enable SNMP agent snmp-agent
Optional
Disabled by default.
You can enable SNMP agent with this
command or any command that
begins with snmp-agent.
Configure an SNMP group
and specify its access right
snmp-agent group v3 group-name
[ authentication | privacy ]
[ read-view read-view ] [ write-view
write-view ] [ notify-view
notify-view ] [ acl acl-number ]
Required
By default, no SNMP group is
configured.
Add a user to the SNMP group
snmp-agent usm-user v3 user-name
group-name [ [ cipher ]
authentication-mode { md5 | sha }
auth-password ] [ acl acl-number ]
Required
If the cipher keyword is specified, both
auth-password and priv-password are
cipher text passwords.
Follow these steps to configure SNMPv1 and SNMPv2c settings:
To do… Use the command…
Remarks
Enter system view system-view —
Enable SNMP agent snmp-agent
Optional
Disabled by default.
You can enable SNMP agent
with this command or any
command that begins with
snmp-agent.