R3166-R3206-HP High-End Firewalls Getting Started Guide-6PW101

88
Table 4 Interface IP address configuration items
Item Descri
p
tion
IP Configuration
Set the approach for obtaining the IP address, including:
• None: The IP address of the interface is not specified,
that is, the interface has no IP address.
• Static Address: Specify the IP address for the interface
manually; if you select this item, you need to specify
both the IP address and the mask.
• DHCP: The interface obtains an IP address
automatically through the DHCP protocol.
• Do not change: The IP address of the interface does not
change.
IMPORTANT:
Modification to the
interface IP address will
result in disconnection
with the device, so make
changes with caution.
IP Address
If you select Stack Address as the approach for obtaining
the IP address, you need to set the interface IP address and
network mask.
Mask
Configuring NAT
Click Next on the interface IP address configuration page to enter the NAT configuration page, as shown
in Figure 56.
Figure 56 Basic c
onfiguration wizard: 5/6 (NAT configuration)