R3166-R3206-HP High-End Firewalls High Availability Command Reference-6PW101

15
undo vrrp method
View
System view
Default level
2: System level
Parameters
real-mac: Maps the real MAC address of the interface to the virtual IP address of the VRRP group.
virtual-mac: Maps the virtual MAC address to the virtual IP address of the VRRP group.
Description
Use the vrrp method command to specify the type of the MAC addresses mapped to the virtual IP
addresses of the VRRP groups.
Use the undo vrrp method command to restore the default.
By default, the virtual MAC addresses are mapped to the virtual IP addresses of the VRRP groups.
Specify the type of the MAC addresses mapped to the virtual IP address before creating a VRRP group.
Otherwise, you cannot change the type of the MAC address by using this command. .
When VRRP works in load balancing mode, a virtual IP address is always mapped to a virtual MAC
address regardless of which type of the MAC addresses to be mapped to the virtual IP address is
specified.
Related commands: display vrrp.
Examples
# Map the virtual IP address of a VRRP group to the real MAC address of the interface.
<Sysname> system-view
[Sysname] vrrp method real-mac
vrrp un-check ttl
Syntax
vrrp un-check ttl
undo vrrp un-check ttl
View
Interface view
Default level
2: System level
Parameters
None
Description
Use the vrrp un-check ttl command to disable TTL check on VRRP packets.
Use the undo vrrp un-check ttl command to enable TTL check on VRRP packets.
By default, TTL check on VRRP packets is enabled.