R3166-R3206-HP High-End Firewalls High Availability Command Reference-6PW101

35
Field Descri
p
tion
Status
Status value of test results, including:
•
Succeeded
•
Unknown error
•
Internal error
•
Timeout
Time Time when the test is completed
display nqa result
Syntax
display nqa result [ admin-name operation-tag ]
View
Any view
Default level
2: System level
Parameters
admin-name operation-tag: Displays results of the last test of a test group. If this argument is not specified,
results of the last tests of all test groups are displayed. admin-name represents the name of the
administrator who creates the NQA operation. It is a string of 1 to 32 characters, case-insensitive.
operation-tag represents the test operation tag. It is a string of 1 to 32 characters, case-insensitive.
Description
Use the display nqa result command to display results of the last NQA test.
Examples
# Display the results of the last UDP jitter test.
<Sysname> display nqa result admin test
NQA entry(admin admin, tag test) test results:
Destination IP address: 192.168.1.42
Send operation times: 10 Receive response times: 10
Min/Max/Average round trip time: 15/46/26
Square-Sum of round trip time: 8103
Last succeeded probe time: 2008-05-29 10:56:38.7
Extended results:
Packet lost in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
UDP-jitter results:
RTT number: 10