R3166-R3206-HP High-End Firewalls High Availability Command Reference-6PW101

39
Field Descri
p
tion
Lost packet(s) for unknown reason Number of lost packets for unknown reasons
Voice scores Voice parameters, displayed only in a voice test
MOS value MOS value calculated for a voice test
ICPIF value ICPIF value calculated for a voice test
display nqa statistics
Syntax
display nqa statistics [ admin-name operation-tag ]
View
Any view
Default level
2: System level
Parameters
admin-name operation-tag: Displays statistics of the specified test group. If this argument is not specified,
statistics of all test groups are displayed. admin-name represents the name of the administrator who
creates the NQA operation. It is a string of 1 to 32 characters, case-insensitive. operation-tag represents
the test operation tag. It is a string of 1 to 32 characters, case-insensitive.
Description
Use the display nqa statistics command to display statistics of NQA test or tests.
After the test operation begins, if not all the probes in the first test have been finished, statistics cannot be
generated. In this case, if you display the statistics using this command, the statistics is displayed as all
0s.
Examples
# Display statistics of UDP jitter tests.
<Sysname> display nqa statistics admin test
NQA entry(admin admin, tag test) test statistics:
NO. : 1
Destination IP address: 192.168.1.42
Start time: 2008-05-29 11:33:29.9
Life time: 8
Send operation times: 70 Receive response times: 70
Min/Max/Average round trip time: 1/63/19
Square-Sum of round trip time: 36330
Extended results:
Packet lost in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0