R3166-R3206-HP High-End Firewalls High Availability Command Reference-6PW101

61
Default levels
2: System level
Parameters
hold-time: Hold time of a statistics group in minutes, in the range 1 to 1440.
Description
Use the statistics hold-time command to configure the hold time of a statistics group.
Use the undo statistics hold-time command to restore the default.
By default, the hold time of a statistics group is 120 minutes.
A statistics group has the aging mechanism. A statistics group will be deleted after it is kept for a period
of time so that information of a new statistics group will be recorded.
This command is supported on all types of tests except DHCP tests.
Examples
# Configure the hold time of a statistics group as 3 minutes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics hold-time 3
statistics max-group
Syntax
statistics max-group number
undo statistics max-group
View
DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice test type view
Default levels
2: System level
Parameters
number: Maximum number of statistics groups that can be kept, in the range 0 to 100. To disable the
statistics collection, set the value to 0.
Description
Use the statistics max-group command to configure the maximum number of statistics groups that can be
kept.
Use the undo statistics max-group command to restore the default.
By default, the maximum number of statistics groups that can be kept is 2.
When the number of statistics groups kept reaches the upper limit, if a new statistics group is generated,
the statistics group that is kept the longest is deleted.
This command is supported in all tests except DHCP tests.
Examples
# Configure the maximum number of statistics groups that can be kept as 5.