R3166-R3206-HP High-End Firewalls High Availability Command Reference-6PW101

62
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics max-group 5
statistics interval
Syntax
statistics interval interval
undo statistics interval
View
DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice test type view
Default levels
2: System level
Parameters
interval: Interval for collecting statistics of the test results in minutes, in the range 1 to 35791394.
Description
Use the statistics interval command to configure the interval for collecting statistics of the test results.
Use the undo statistics interval command to restore the default.
By default, the interval is 60 minutes.
NQA puts the NQA tests completed in a certain interval into one group, and calculates the statistics of
the test results of the group. These statistics form a statistics group. You can use the display nqa statistics
command to display information of the statistics group.
This command is supported on all types of tests except DHCP tests.
Examples
# Configure the interval for collecting statistics of the test results as 2 minutes.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] statistics interval 2
tos
Syntax
tos value
undo tos
View
DLSw, DNS, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice test type view
Default level
2: System level