R3166-R3206-HP High-End Firewalls High Availability Command Reference-6PW101

66
Default level
2: System level
Parameters
instance: VPN instance name, a string of 1 to 31 characters. It is case sensitive.
Description
Use the vpn-instance command to specify a VPN instance.
Use the undo vpn-instance command to restore the default.
By default, no VPN instance is specified.
After you specify a VPN instance, NQA will test the connectivity of the specified VPN tunnel.
Examples
# Specify the VPN instance vpn1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] vpn-instance vpn1
NQA server configuration commands
NOTE:
You only need to configure the NQA server for UDP jitter, TCP, UDP echo and voice tests.
display nqa server status
Syntax
display nqa server status
View
Any view
Default level
2: System level
Parameters
None
Description
Use the display nqa server status command to display NQA server status.
Examples
# Display NQA server status.
<Sysname> display nqa server status
nqa server is: enabled
tcp-connect:
IP Address Port Status
2.2.2.2 2000 active