R3166-R3206-HP High-End Firewalls High Availability Command Reference-6PW101

68
View
System view
Default level
2: System level
Parameters
ip-address: IP address specified for the TCP listening service on the NQA server.
port-number: Port number specified for the TCP listening service on the NQA server, in the range 1 to
50000.-
Description
Use the nqa-server tcp-connect command to create a TCP listening service on the NQA server.
Use the undo nqa-server tcp-connect command to remove the TCP listening service created.
• Configure the command on the NQA server for TCP tests only.
• The IP address and port number must be consistent with those on the NQA client and must be
different from those for an existing listening service.
• The IP address must be that of an interface on the NQA server. Otherwise, the configuration will be
invalid.
Related commands: nqa server enable, display nqa server status.
Examples
# Create a TCP listening service by using the IP address 169.254.10.2 and port 9000.
<Sysname> system-view
[Sysname] nqa server tcp-connect 169.254.10.2 9000
nqa server udp-echo
Syntax
nqa server udp-echo ip-address port-number
undo nqa server udp-echo ip-address port-number
View
System view
Default level
2: System level
Parameters
ip-address: IP address specified for the UDP listening service on the NQA server.
port-number: Port number specified for the UDP listening service on the NQA server, in the range 1 to
50000.
Description
Use the nqa-server udp-echo command to create a UDP listening service on the NQA server.
Use the undo nqa-server udp-echo command to remove the UDP listening service created.
• Configure the command on the NQA server for UDP jitter, UDP echo and voice tests only.