R3166-R3206-HP High-End Firewalls High Availability Command Reference-6PW101

70
Ethernet Link Aggregation Configuration
Commands
Ethernet Link Aggregation Configuration
Commands
NOTE:
Only the A-F5000 supports link aggregation, and only supports static mode.
description
Syntax
description text
undo description
View
Layer 2 aggregate interface view, Layer 3 aggregate interface view, Layer 3 aggregate subinterface
view
Default Level
2: System level
Parameters
text: Description of the interface, a string of 1 to 80 characters.
Description
Use the description command to configure a description for an interface. You can include information
such as the purpose of the interface for the ease of management.
Use the undo description command to restore the default.
By default, the description of an interface is interface-name Interface. For example, the default
description of Bridge-Aggregation1 is Bridge-Aggregation1 Interface.
Examples
# Set the description of Layer 2 aggregate interface Bridge-Aggregation 1 to connect to the lab.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description connect to the lab
display lacp system-id
Syntax
display lacp system-id