R3166-R3206-HP High-End Firewalls High Availability Command Reference-6PW101

71
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display lacp system-id command to display the system ID of the local system.
The system ID comprises the system LACP priority and the system MAC address.
You can use the lacp system-priority command to change the LACP priority of the local system. When
you do that, the LACP priority value you specify in the command is in decimal format. However, it is
displayed as a hexadecimal value with the display lacp system-id command.
Related commands: lacp system-priority.
Examples
# Display the local system ID.
<Sysname> display lacp system-id
Actor System ID: 0x8000, 0000-fc00-6504
Table 13 display lacp system-id command output description
Field Descri
p
tion
Actor System ID: 0x8000,
0000-fc00-6504
The local system ID, which comprises the LACP system priority (0x8000
in this sample output) and the system MAC address (0000-fc00-6504 in
this sample output).
display link-aggregation load-sharing mode
Syntax
display link-aggregation load-sharing mode [ interface [ { bridge-aggregation | route-aggregation }
interface-number ] ]
View
Any view
Default Level
1: Monitor level
Parameters
bridge-aggregation: Displays the load sharing criterion or criteria of the aggregation group
corresponding to the specified Layer 2 aggregate interface.
route-aggregation: Displays the load sharing criterion or criteria of the aggregation group
corresponding to the specified Layer 3 aggregate interface.
interface-number: Specifies the number of an existing aggregate interface.