R3166-R3206-HP High-End Firewalls High Availability Command Reference-6PW101

View

Any view

Default Level

1: Monitor level

Parameters

None

Description

Use the display link-aggregation summary command to display the summary information of all

aggregation groups.

You may find that information about the remote system for a static link aggregation group is either

displayed as none or not displayed at all. This is normal because this type of aggregation group is not

aware of its partner.

Examples

# Display the summary information of all aggregation groups.

<Sysname> display link-aggregation summary

Aggregation Interface Type:

BAGG -- Bridge-Aggregation, RAGG -- Route-Aggregation

Aggregation Mode: S -- Static, D -- Dynamic

Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing

Actor System ID: 0x8000, 000f-e267-6c6a

AGG AGG Partner ID Select Unselect Share

Interface Mode Ports Ports Type

-------------------------------------------------------------------------

BAGG1 S none 1 0 Shar

BAGG10 D 0x8000, 000f-e267-57ad 2 0 Shar

Table 16 display link-aggregation summary command output description

Field Descri

tion

Aggregation Interface Type

Aggregate interface type:

• BAGG for Layer 2 aggregate interface

• RAGG for Layer 3 aggregate interface

Aggregation Mode

Aggregation group type:

• S for static link aggregation

• D for dynamic aggregation

Loadsharing Type

Load sharing type:

• Shar for load sharing

• NonS for non-load sharing

Actor System ID

Local system ID, which comprises the system LACP priority and the

system MAC address

AGG Interface Type and number of the aggregate interface

AGG Mode Aggregation group type