R3166-R3206-HP High-End Firewalls High Availability Command Reference-6PW101

80
Examples
# Enable linkUp/linkDown trap generation on Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] snmp-agent trap enable
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] enable snmp trap updown
interface bridge-aggregation
Syntax
interface bridge-aggregation interface-number
undo interface bridge-aggregation interface-number
View
System view
Default Level
2: System level
Parameters
interface-number: Layer 2 aggregate interface number.
Description
Use the interface bridge-aggregation command to create a Layer 2 aggregate interface and enter the
Layer 2 aggregate interface view.
Use the undo interface bridge-aggregation command to remove a Layer 2 aggregate interface.
Upon creation of a Layer 2 aggregate interface, a Layer 2 aggregation group numbered the same is
created automatically. Removing the Layer 2 aggregate interface also removes the Layer 2 aggregation
group. At the same time, the member ports of the aggregation group, if any, leave the aggregation
group.
Examples
# Create Layer 2 aggregate interface Bridge-Aggregation 1 and enter its view.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1]
interface route-aggregation
Syntax
interface route-aggregation { interface-number | interface-number.subnumber }
undo interface route-aggregation { interface-number | interface-number.subnumber }
View
System view
Default Level
2: System level