R3166-R3206-HP High-End Firewalls High Availability Command Reference-6PW101

83
undo link-aggregation mode
View
Layer 2 aggregate interface view, Layer 3 aggregate interface view
Default Level
2: System level
Parameters
None
Description
Use the link-aggregation mode dynamic command to configure an aggregation group to work in
dynamic aggregation mode.
Use the undo link-aggregation mode command to restore the default.
By default, an aggregation group works in static aggregation mode.
To change the aggregation mode of an aggregation group that contains member ports, remove all the
member ports from the aggregation group first.
Examples
# Configure the aggregation group corresponding to Bridge-Aggregation 1 to work in dynamic
aggregation mode.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation mode dynamic
link-aggregation port-priority
Syntax
link-aggregation port-priority port-priority
undo link-aggregation port-priority
View
Ethernet interface view
Default Level
2: System level
Parameters
port-priority: Port aggregation priority, in the range 0 to 65535. The smaller this value, the higher the
port aggregation priority.
Description
Use the link-aggregation port-priority command to set the aggregation priority of a port.
Use the undo link-aggregation port-priority command to restore the default.
The default aggregation priority of a port is 32768.
Examples
# Set the aggregation priority of port GigabitEthernet 0/1 to 64.
<Sysname> system-view