R3166-R3206-HP High-End Firewalls High Availability Command Reference-6PW101

84
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] link-aggregation port-priority 64
link-aggregation selected-port maximum
Syntax
link-aggregation selected-port maximum number
undo link-aggregation selected-port maximum
View
Layer 2 aggregate interface view, Layer 3 aggregate interface view
Default Level
2: System level
Parameters
number: Maximum number of selected ports allowed in the current aggregation group, which is in the
range 1 to 8.
Description
Use the link-aggregation selected-port maximum command to configure the maximum number of
selected ports allowed in the current aggregation group.
Use the undo link-aggregation selected-port maximum command to restore the default.
By default, the maximum number of selected ports allowed in an aggregation group depends on the
hardware capabilities of the member ports.
Note that executing this command may cause some of the selected member ports in the current
aggregation group to become unselected.
Examples
# Configure the maximum number of selected ports allowed in the aggregation group corresponding to
Layer 2 aggregate interface Bridge-Aggregation 1 as 3.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] link-aggregation selected-port maximum 3
link-aggregation selected-port minimum
Syntax
link-aggregation selected-port minimum number
undo link-aggregation selected-port minimum
View
Layer 2 aggregate interface view, Layer 3 aggregate interface view
Default Level
2: System level