R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

104

Figure 43 Set the state of a member port in a dynamic aggregation group

Meanwhile, the system with the higher system ID, being aware of the aggregation state changes on the

remote system, changes the aggregation state of its ports accordingly.

NOTE:

• Because any port attribute or class-two configuration change on a member port may cause the

aggregation state of the port and other member ports to change and thus affect services, it is

recommended that you do that with caution.

• In a dynamic a

ation

roup, when the a

ation state of a local port chan

es, the a

ation

state of the peer port also changes accordingly.

• A port that joins a dynamic aggregation group after the selected port limit has been reached will be

placed in the selected state if it is more eligible for being selected than a current member port.

Load Sharing Criteria for Link Aggregation Groups

In a link aggregation group, traffic may be load-shared across the selected member ports based on a

certain criterion or a set of criteria depending on your configuration.

You can choose one of the following criteria or any combination of them for load sharing: