R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

113
them. Alternatively, you can let the system automatically choose link-aggregation load sharing criterion
or criteria based on packet types (Layer 2, IPv4, or IPv6 for example).
You can configure global or group-specific load sharing criteria. A link aggregation group preferentially
uses the group-specific load sharing criteria. If no group-specific load sharing criteria is available, it uses
the global load sharing criteria.
Configuring the global link-aggregation load sharing criteria
Follow these steps to configure the global link-aggregation load sharing criteria:
To do... Use the command... Remarks
Enter system view system-view —
Configure the global link
aggregation load sharing
criteria
link-aggregation load-sharing mode
{ destination-ip | destination-port |
ip-protocol | source-ip | source-port }
Required
Configuring group-specific load sharing criteria
Follow these steps to configure load sharing criteria for a link aggregation group:
To do… Use the command…
Remarks
Enter system view system-view —
Enter
aggregate
interface
view
Enter Layer 2 aggregate
interface view
interface bridge-aggregation interface-number
Use either
command
Enter Layer 3 aggregate
interface view
interface route-aggregation interface-number
Configure the load sharing criteria for
the aggregation group
link-aggregation load-sharing mode
{ destination-ip | destination-port | ip-protocol
| source-ip | source-port } *
Required
Displaying and Maintaining Ethernet Link
Aggregation
To do... Use the command... Remarks
Display the local system ID display lacp system-id Available in any view
Display the global or
group-specific link-aggregation
load sharing criteria
display link-aggregation load-sharing mode
[ interface [ { bridge-aggregation |
route-aggregation } interface-number ] ]
Available in any view
Display detailed link aggregation
information on link aggregation
member ports
display link-aggregation member-port
[ interface-list ]
Available in any view
Display the summary of all
aggregation groups
display link-aggregation summary Available in any view
Display detailed information about
a specific or all aggregation
groups
display link-aggregation verbose
[ { bridge-aggregation | route-aggregation }
[ interface-number ] ]
Available in any view