R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

8
Figure 7 VRRP group page
Figure 8 Create a VRRP group
Table 2 VRRP group configuration items
Item Descri
p
tion
VRID Set the group number of the VRRP group.
Virtual IP
Configure the virtual IP address of the VRRP group.
• If the VRRP interface connects to multiple subnets, you can configure multiple
virtual IP addresses for the VRRP group to implement router backup on different
subnets.
• The virtual IP address cannot be all 0s (0.0.0.0), a broadcast address
(255.255.255.255), a loopback address, any other invalid IP address (like
0.0.0.1), or an address that does not belong to class A, B or C.
• The VRRP group can operate normally only when the virtual IP address is valid and
on the same network segment with the interface IP address. Otherwise, the VRRP
group will fail.
Table 3 VRRP group list items
Item Descri
p
tion
Run Priority
Running status of a router, that is, the current status of the router. After you configure
to monitor the specified interface or Track object, the priority of a router changes with
the change of the interface or Track object.
Status
Status of the current router in the VRRP group, which takes the value of Master, Backup
or Initialize.
Return to VRRP configuration task list.