R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

13
• Type 5 in the Advertise Time box.
• Click Display Track Config.
• Select GigabitEthernet0/2 from the Interface box.
• Type 30 in the Reduced Priority box.
• Click Add to add the interface to the list box of tracked interface.
• Click Apply.
Configure Firewall B
# Configure the IP address of GigabitEthernet 0/1.
• Select Device Management > Interface from the navigation tree, and click the icon
corresponding to GigabitEthernet 0/1.
• Select the Static Address option.
• Type 202.38.160.2 in the IP Address box.
• Select 24 (255.255.255.0) from the Mask box.
• Click Apply.
# Create VRRP group 1.
• Select High Reliability > VRRP from the navigation tree to enter the VRRP interfaces page. Click the
icon corresponding to GigabitEthernet 0/1 to enter the VRRP Configuration on Interface page
(as shown in Figure 7)
, and click Add.
• Type 1 in the VRID box.
• Type 202.38.160.111 in the Virtual IP box.
• Click Add to add the virtual IP address to the Virtual IP Members box.
• Click Apply.
# Configure VRRP group attributes.
• Click the icon corresponding to VRRP group 1 on the VRRP group page of GigabitEthernet 0/1.
• Select Preemptive from the Preempt Mode box.
• Type 5 in the Delay box.
• Select Simple from the Authentication box.
• Type hello in the Key box.
• Type 5 in the Advertise Time box.
• Click Apply.
Multiple VRRP groups configuration example
Network requirements
As shown in Figure 11:
• I
n t h e s e g m e n t 2 0 2. 3 8 .16 0 . 0 / 2 4 , s o m e h o s t s u s e 2 02 . 3 8 .16 0 .111/24 as their default gateway and
some hosts use 202.38.160.112/24 as their default gateway.
• Use VRRP groups to implement load balancing and mutual backup between default gateways.