R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

40
NOTE:
Collaboration applies to interfaces that are up or down simultaneously on one device. If two devices are
both configured with collaboration groups and connected through interfaces in the groups, the
collaboration between the two devices may fail.
Configuring a collaboration group
Configuration task list
Table 8 Collaboration group configuration task list
Task Remarks
Configuring a collaboration group
Required
In this procedure, ports are assigned to a collaboration group.
Collaboration groups are not manually created. By default, there are 15
collaboration groups in the system. The group numbers are from 1 to 15.
By default, none of these collaboration groups contain any member port.
Displaying the status of a
collaboration group and its
member ports
Optional
Display the status of a collaboration group and its member ports
Configuring a collaboration group
Select High Reliability > Collaboration Group from the navigation tree to enter the page for displaying
collaboration groups, as shown in Figure 21. C
lick the icon corresponding to the collaboration group
you want to configure to enter the page for displaying and configuring the collaboration group member
ports, as shown in Figure 22.