R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

52
# Set the authentication mode of VRRP group 1 to simple, and the authentication key to hello.
[FirewallA-GigabitEthernet0/1] vrrp vrid 1 authentication-mode simple hello
# Configure the master to send VRRP packets at an interval of five seconds.
[FirewallA-GigabitEthernet0/1] vrrp vrid 1 timer advertise 5
# Configure Firewall A to work in preemptive mode, and set the preemption delay to five seconds.
[FirewallA-GigabitEthernet0/1] vrrp vrid 1 preempt-mode timer delay 5
# Configure to monitor track entry 1 and specify the priority decrement to 30.
[FirewallA-GigabitEthernet0/1] vrrp vrid 1 track 1 reduced 30
5. Configure VRRP on Firewall B.
<FirewallB> system-view
[FirewallB] interface gigabitethernet 0/1
# Create VRRP group 1, and configure the virtual IP address 10.1.1.10 for the group.
[FirewallB-GigabitEthernet0/1] vrrp vrid 1 virtual-ip 10.1.1.10
# Set the authentication mode of VRRP group 1 to simple, and the authentication key to hello.
[FirewallB-GigabitEthernet0/1] vrrp vrid 1 authentication-mode simple hello
# Configure the master to send VRRP packets at an interval of five seconds.
[FirewallB-GigabitEthernet0/1] vrrp vrid 1 timer advertise 5
# Configure Firewall B to work in preemptive mode, and set the preemption delay to five seconds.
[FirewallB-GigabitEthernet0/1] vrrp vrid 1 preempt-mode timer delay 5
6. Verify the configuration
After configuration, ping Host B on Host A, and you can see that Host B is reachable. Use the display
vrrp command to view the configuration result.
# Display detailed information about VRRP group 1 on Firewall A.
[FirewallA] display vrrp verbose
IPv4 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC
Total number of virtual routers : 1
Interface GigabitEthernet0/1
VRID : 1 Adver Timer : 5
Admin Status : Up State : Master
Config Pri : 110 Running Pri : 110
Preempt Mode : Yes Delay Time : 5
Auth Type : Simple Key : hello
Virtual IP : 10.1.1.10
Virtual MAC : 0000-5e00-0101
Master IP : 10.1.1.1
VRRP Track Information:
Track Object : 1 State : Positive Pri Reduced : 30
# Display detailed information about VRRP group 1 on Firewall B.
[FirewallB] display vrrp verbose
IPv4 Standby Information:
Run Mode : Standard
Run Method : Virtual MAC