R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

62
Task Remarks
Configuring DNS tests
Configuring HTTP tests
Configuring UDP jitter tests
Configuring SNMP tests
Configuring TCP tests
Configuring UDP echo tests
Configuring voice tests
Configuring DLSw tests
Configuring the collaboration function Optional
Configuring trap delivery Optional
Configuring the NQA statistics collection function Optional
Configuring the history records saving function Optional
Configuring optional parameters for an NQA test group Optional
Configuring a schedule for an NQA test group Required
Configuring the NQA server
To perform TCP, UDP echo, UDP jitter, or voice tests, configure the NQA server on the peer device. The
NQA server responses to the probe packets sent from the NQA client by listening to the specified
destination address and port number.
Follow these steps to configure the NQA server:
To do… Use the command…
Remarks
Enter system view system-view —
Enable the NQA server nqa server enable
Required
Disabled by default.
Configure the listening
service
nqa server { tcp-connect |
udp-echo } ip-address
port-number
Required
The destination IP address and port number
must be the same as those configured on the
NQA client. A listening service must be
unique on the NQA server.
Enabling the NQA client
Configurations on the NQA client take effect only when the NQA client is enabled.
Follow these steps to enable the NQA client:
To do… Use the command…
Remarks
Enter system view system-view —