R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

63
To do… Use the command… Remarks
Enable the NQA client nqa agent enable
Optional
Enabled by default.
Creating an NQA test group
Create an NQA test group before you configure NQA tests.
Follow theses steps to create an NQA test group:
To do… Use the command…
Remarks
Enter system view system-view —
Create an NQA test group and
enter the NQA test group view
nqa entry admin-name
operation-tag
Required
In the NQA test group view, you can specify
the test type
You can use the nqa entry command to enter
the test type view of an NQA test group with
test type configured.
Configuring an NQA test group
Configuring ICMP echo tests
ICMP echo tests of an NQA test group uses ICMP echo response information to test reachability of a
destination host. An ICMP echo test has the same function as the ping command but provides more
output information. In addition, you can specify the next hop for ICMP echo tests. ICMP echo tests are
used to locate connectivity problems in a network.
Follow these steps to configure ICMP echo tests:
To do… Use the command…
Remarks
Enter system view system-view —
Enter NQA test group view
nqa entry admin-name
operation-tag
—
Configure the test type as ICMP
echo and enter test type view
type icmp-echo Required
Configure the destination address
of ICMP echo requests
destination ip ip-address
Required
By default, no destination IP address is
configured.
Configure the size of the data field
in each ICMP echo request
data-size size
Optional
100 bytes by default.
Configure the string to be filled in
the data field of each ICMP echo
request
data-fill string
Optional
By default, the string is the
hexadecimal number
00010203040506070809.