R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

70
Configuration prerequisites
Before you start SNMP tests, enable the SNMP agent function on the device that serves as an SNMP
agent. For more information about the SNMP agent configuration, see Network Management
Configuration Guide.
Configuring SNMP tests
Follow these steps to configure SNMP tests:
To do… Use the command…
Remarks
Enter system view system-view —
Enter NQA test group view
nqa entry admin-name
operation-tag
—
Configure the test type as SNMP
and enter test type view
type snmp Required
Configure the destination address
of SNMP packets
destination ip ip-address
Required
By default, no destination IP
address is configured.
Specify the source port of SNMP
packets
source port port-number
Optional
By default, no source port number
is specified.
Configure the source IP address of
SNMP packets
source ip ip-address
Optional
By default, no source IP address is
specified.
The source IP address must be the
IP address of a local interface. The
local interface must be up;
otherwise, no probe packets can
be sent out.
Configure optional parameters
See “Configuring optional
parameters for an NQA test
group”
Optional
Configuring TCP tests
TCP tests of an NQA test group are used to test the TCP connection between the NQA client and a port
on the NQA server and the time for setting up a connection. The test result helps you understand the
availability and performance of the services provided by the port on the server.
Configuration prerequisites
TCP tests require cooperation between the NQA server and the NQA client. Before you start TCP tests,
configure a TCP listening service on the NQA server. For more information about the TCP listening
service configuration, see “Configuring the NQA server.”
Configuring TCP tests
Follow these steps to configure TCP tests:
To do… Use the command…
Remarks
Enter system view system-view —