R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module

Configuring trap delivery

Traps can be sent to the network management server when a test completes, fails or a probe fails.

Configuration prerequisites

Before you configure trap delivery, configure the destination address of the trap message with the

snmp-agent target-host command, create an NQA test group, and configure related parameters.

Configuring trap delivery

Follow these steps to configure trap delivery:

To do… Use the command…

Remarks

Enter system view system-view —

Enter NQA test group view

nqa entry admin-name

operation-tag

—

Enter test type view of the test

group

type { dhcp | dlsw | dns | ftp |

http | icmp-echo | snmp | tcp |

udp-echo | udp-jitter | voice }

—

Configure to send traps to network

management server under

specified conditions

reaction trap { probe-failure

consecutive-probe-failures |

test-complete | test-failure

cumulate-probe-failures }

Optional

No traps are sent to the network

management server by default.

NOTE:

Only the reaction trap test-complete command is supported in a voice test, namely, in a voice test, traps

are sent to the NMS only if the test succeeds.

Configuring the NQA statistics collection function

NQA groups tests completed in a time period for a test group, and calculates the test result statistics. The

statistics form a statistics group. To view information about the statistics groups, use the display nqa

statistics command. To set the interval for collecting statistics, use the statistics interval command.

When the number of statistics groups kept reaches the upper limit and a new statistics group is to be

saved, the oldest statistics group is deleted. To set the maximum number of statistics groups that can be

kept, use the statistics max-group command.

A statistics group is formed after the last test is completed within the specified interval. Statistics groups

have an aging mechanism. A statistics group is deleted when its hold time expires. To set the hold time

of statistics groups for a test group, use the statistics hold-time command.

Follow these steps to configure the NQA statistics collection function: