R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

77
To do… Use the command… Remarks
Configure the interval for collecting
the statistics of test results
statistics interval interval
Optional
60 minutes by default.
Configure the maximum number of
statistics groups that can be kept
statistics max-group number
Optional
2 by default.
To disable collecting NQA
statistics, set the maximum number
to 0.
Configure the hold time of statistics
groups
statistics hold-time hold-time
Optional
120 minutes by default.
NOTE:
• The NQA statistics collection function is not supported in DHCP tests.
• If you use the frequency command to set the frequency between two consecutive tests to 0, only one tes
t
is performed, and no statistics group information is collected.
Configuring the history records saving function
The history records saving function enables the system to save the history records of NQA tests. To view
the history records of a test group, use the display nqa history command.
In addition, you can configure the following elements:
• Lifetime of the history records—The records are removed when the lifetime is reached.
• The maximum number of history records that can be saved in a test group—If the maximum number
is reached, the earliest history records are removed.
Follow these steps to configure the history records saving function of an NQA test group:
To do… Use the command…
Remarks
Enter system view system-view —
Enter NQA test group view nqa entry admin-name operation-tag —
Enter NQA test type view
type { dhcp | dlsw | dns | ftp | http |
icmp-echo | snmp | tcp | udp-echo |
udp-jitter | voice }
—
Enable the saving of the
history records of the NQA
test group
history-record enable
Required
By default, history records of the
NQA test group are not saved.
Set the lifetime of the history
records in an NQA test
group
history-record keep-time keep-time
Optional
By default, the history records in the
NQA test group are kept for 120
minutes.
Configure the maximum
number of history records
that can be saved in a test
group
history-record number number
Optional
By default, the maximum number of
records that can be saved in a test
group is 50