R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

Failures due to sequence error: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packet(s) arrived late: 0

# Display the history of ICMP echo tests.

[Firewall] display nqa history admin test

NQA entry(admin admin, tag test) history record(s):

Index Response Status Time

370 3 Succeeded 2007-08-23 15:00:01.2

369 3 Succeeded 2007-08-23 15:00:01.2

368 3 Succeeded 2007-08-23 15:00:01.2

367 5 Succeeded 2007-08-23 15:00:01.2

366 3 Succeeded 2007-08-23 15:00:01.2

365 3 Succeeded 2007-08-23 15:00:01.2

364 3 Succeeded 2007-08-23 15:00:01.1

363 2 Succeeded 2007-08-23 15:00:01.1

362 3 Succeeded 2007-08-23 15:00:01.1

361 2 Succeeded 2007-08-23 15:00:01.1

DHCP test configuration example

Network requirements

Use the NQA DHCP function to test the time necessary for Firewall to obtain an IP address from the DHCP

server Router.

Figure 30 Network diagram for DHCP (on routers)

Configuration procedure

# Create a DHCP test group and configure related test parameters.

<Firewall> system-view

[Firewall] nqa entry admin test

[Firewall-nqa-admin-test] type dhcp

[Firewall-nqa-admin-test-dhcp] operation interface gigabitethernet 0/1

# Enable the saving of history records.

[Firewall-nqa-admin-test-dhcp] history-record enable

[Firewall-nqa-admin-test-dhcp] quit

# Enable DHCP test.

[Firewall] nqa schedule admin test start-time now lifetime forever

# Disable DHCP test after the test begins for a period of time.

[Firewall] undo nqa schedule admin test

# Display results of the last DHCP test.

[Firewall] display nqa result admin test