R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

NQA entry(admin admin, tag test) test results:

Send operation times: 1 Receive response times: 1

Min/Max/Average round trip time: 512/512/512

Square-Sum of round trip time: 262144

Last succeeded probe time: 2007-11-22 09:54:03.8

Extended results:

Packet lost in test: 0%

Failures due to timeout: 0

Failures due to disconnect: 0

Failures due to no connection: 0

Failures due to sequence error: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packet(s) arrived late: 0

# Display the history of DHCP tests.

[Firewall] display nqa history admin test

NQA entry(admin admin, tag test) history record(s):

Index Response Status Time

1 512 Succeeded 2007-11-22 09:54:03.8

DNS test configuration example

Network requirements

Use the DNS function to test whether Firewall can resolve the domain name host.com into an IP address

through the DNS server and test the time required for resolution.

Figure 31 Network diagram for DNS tests

Configuration procedure

# Create an DNS test group and configure related test parameters.

<Firewall> system-view

[Firewall] nqa entry admin test

[Firewall-nqa-admin-test] type dns

[Firewall-nqa-admin-test-dns] destination ip 10.2.2.2

[Firewall-nqa-admin-test-dns] resolve-target host.com

# Enable the saving of history records.

[Firewall-nqa-admin-test-dns] history-record enable

[Firewall-nqa-admin-test-dns] quit

# Enable DNS test.

[Firewall] nqa schedule admin test start-time now lifetime forever

# Disable DNS test after the test begins for a period of time.

[Firewall] undo nqa schedule admin test