R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

89
[Firewall] display nqa result admin test
NQA entry(admin admin, tag test) test results:
Destination IP address: 10.2.2.2
Send operation times: 1 Receive response times: 1
Min/Max/Average round trip time: 50/50/50
Square-Sum of round trip time: 2500
Last succeeded probe time: 2007-11-22 10:24:41.1
Extended results:
Packet lost in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
# Display the history of SNMP tests.
[Firewall] display nqa history admin test
NQA entry(admin admin, tag test) history record(s):
Index Response Status Time
1 50 Timeout 2007-11-22 10:24:41.1
TCP test configuration example
Network requirements
Use the NQA TCP function to test the time for establishing a TCP connection between Firewall and Device.
The port number used is 9000.
Figure 36 Network diagram for TCP tests
Configuration procedure
1. Configure Device
# Enable the NQA server and configure the listening IP address as 10.2.2.2 and port number as 9000.
<Device> system-view
[Device] nqa server enable
[Device] nqa server tcp-connect 10.2.2.2 9000
2. Configure Firewall
# Create a TCP test group and configure related test parameters.
<Firewall> system-view
[Firewall] nqa entry admin test
[Firewall-nqa-admin-test] type tcp
[Firewall-nqa-admin-test-tcp] destination ip 10.2.2.2