R3166-R3206-HP High-End Firewalls High Availability Configuration Guide-6PW101

[Firewall-nqa-admin-test-tcp] destination port 9000

# Enable the saving of history records.

[Firewall-nqa-admin-test-tcp] history-record enable

[Firewall-nqa-admin-test-tcp] quit

# Enable TCP test.

[Firewall] nqa schedule admin test start-time now lifetime forever

# Disable TCP test after the test begins for a period of time.

[Firewall] undo nqa schedule admin test

# Display results of the last TCP test.

[Firewall] display nqa result admin test

NQA entry(admin admin, tag test) test results:

Destination IP address: 10.2.2.2

Send operation times: 1 Receive response times: 1

Min/Max/Average round trip time: 13/13/13

Square-Sum of round trip time: 169

Last succeeded probe time: 2007-11-22 10:27:25.1

Extended results:

Packet lost in test: 0%

Failures due to timeout: 0

Failures due to disconnect: 0

Failures due to no connection: 0

Failures due to sequence error: 0

Failures due to internal error: 0

Failures due to other errors: 0

Packet(s) arrived late: 0

# Display the history of TCP tests.

[Firewall] display nqa history admin test

NQA entry(admin admin, tag test) history record(s):

Index Response Status Time

1 13 Succeeded 2007-11-22 10:27:25.1

UDP echo test configuration example

Network requirements

Use the NQA UDP echo function to test the round trip time between Firewall and Device. The port number

is 8000.

Figure 37 Network diagram for the UDP echo tests

Configuration procedure

1. Configure Device

# Enable the NQA server and configure the listening IP address as 10.2.2.2 and port number as 8000.